Homebrew-Connection.org

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: 360-HackBox Lite v2.1 (300) : An all in one app for RGH/Jtag console  (Read 2296 times)

Razkar

  • *
  • Karma: 14
  • Offline Offline
  • Posts: 166
    • View Profile

The mexican developer Nknave release today a new version of his AiO RGH/Jtag application called 360-HackBox Lite, now in version v2.1 (300). This application have (of course) xebuild features so you will be able to build jtag/rgh nand images, but there is also some other helpful features like built-in read/write support for many device (USB SPI/ LPT with nandpro, SD card with nandMMC, Squirt programmer with Squirter), Youtube video viewer, Diagram viewer ...

Features list :
Quote
- Reads NAND twice with a press of a button where it will identify the FlashConfig, Mobo and if it's a JasperBB it will configure to read 66MB instead of 16MB
- When opening a NAND image manually it will try to parse the CPU Key from the following in this order: "cpukey.txt", "fuses.txt", "KV_Info.txt".
- CPLD Programmer that will flash your Glitch chip with just selecting the version to use
- Xell Creator for both JTAG and Glitch where it uses IBuild to generate a valid JTAG Xell image.
Don't forget to check the "AUD_CLAMP" checkbox if using this config. The ECC creation is already automatic. At the end if any badblocks are found from the source image, it will generate a todo taks
for when flashing that image.
- Flashing Xell will flash Xell for you and if during the creation there are bad blocks found it will automaticly fix your NAND.
- Hacked image creation that uses xeBuild v1.04 and DashLaunch v3.02. It's automated according to your currently openend nand image. Also it will generate a backup folder according to the console's serial number so that you may zip up and save.
- Copy to USB with RawFlash. If you wish to finish you flashing via Xell, this will copy what you need!
- Save backups to a *.zip where you'll be prompted to choose destination save file.
- Flashing the currently opened NAND image. CAREFULL!! it does not verify anything and it will just flash on the fly!
- Either Download or choose a valid *.zip to copy avatars update to this app. MD5 verification is active.
- Copy avatars update to your USB so that you may complete the install/update of the hacked dash.
- Either Download or choose a valid *.zip to install the Kernel pirs that is needed for xeBuild v1.04 to build hacked images. MD5 verification is active.
- Edit lanch.ini ( basic editor that comes with the most basic options )
- Download CPU Key and flashdmp.bin from Xell from your PC. No need to specify IP addres or base IP,
it will detect your computer's IP and will take that base and search you LAN, may take from 3 to 6 seconds to find and begin the download.
- Also counts with updating feature online where it will simply let know you if there's anything new you need to download. ( At last!!! )

Changlog :

Quote
v2.1 Build (300)

- Added Alternative DGX ECC for flashing ( pop up will show )

v2.1 Build (299)

- Added DashLaunch v3.06
- Added POST_OUT Corona v3/v4 Image

v2.1 Build (296)

- Got rid of ibuild and replaced with prebuilt images
- Touched up the GUI a bit (not very noticeable)
- Small bugfixes

v2.1 Build (295)

- Added support for DGX Thanks to Team Xecuter
- Added DGX Install Diagram
- Added DGX ECC files
- Updated Trinity mobo identify image
- Note: The "Flash DGX" option will only be available when the CB is not supported by the previous
ecc Xell generation method and it is only valid for Slim Consoles of course.

v2.1 Build (294)

- Internal code serviced ( Optimizations and small bugfixes )
- Added Mobo Indentify for Trinity and Corona ( Thanks Team Xecuter )

v2.1 Build (293)

- Corrected bug that does not enable the "No Bootanim.xex" option for fakeanim

v2.1 Build (292)

- Added Support for XeBuild 1.06
- Added Dashlaunch 3.05
- Added Support for Dash 16202, creation via xebuild, downloading of pirs and avatars zip
- Removed restriction to RGH2.0 creation, due to TX-DGX comming, you may build any NAND with glitch2
settings freely =)
- "No bootanim" is now default to off since you don't always have to say no if you don't want it
- Added Maximus Stinger v3.1 Oscillator Add-On pcb diagram



Logged
Pages: [1]   Go to Top