Homebrew-Connection.org

Please login or register.

Login with username, password and session length
Advanced search  

News:

Author Topic: ecc for a jasper that has no stock!  (Read 1921 times)

h.ssali

  • HC Beginner
  • Karma: 0
  • Offline Offline
  • Posts: 1
    • View Profile
ecc for a jasper that has no stock!
« on: 30 May 2014 à 21:10:52 »

greetings to HC members, i'm new member but not the site.
i have a jasper i bought from a person who wanted to RGH it but failed
i have got my r-jtag kit but i just don't know how i can grab the key
since the  console just has the ecc that has failed to. I'm not the one flashed it there but i also tried but no luck. the dash is 2.0.15574.
i hope there is someone who knows how to boot into xell with a donor.
i don't know very well how to do it.
all the help will be much appreciated
Logged

Dr.Gonzo

  • *
  • Karma: 7
  • Offline Offline
  • Posts: 144
    • View Profile
Re: ecc for a jasper that has no stock!
« Reply #1 on: 30 May 2014 à 22:15:20 »

Possible reasons the Xbox 360 doesnt glitch, can be varied. Poor soldering, wrong config on R-JTAG (dip switches), wrong Xell, and so on. Below there is a link, which describes  to grap your CPU Key, with your R JTAG Equipment. If everything goes wrong, you can use a donor Nand, but it should be the very last solution

http://team-xecuter.com/forums/showthread.php?t=135779

greets.
Logged

DLink DIR-825 B1 DD-WRT v24-sp2 Build 10-12-12-r20119
Netgear WNDR3700 V1 DD-WRT v24-sp2 Build 06-14-11-r17201

Swizzy

  • *
  • Karma: 36
  • Offline Offline
  • Posts: 303
  • I'm Swizzy, you are?
    • View Profile
Re: ecc for a jasper that has no stock!
« Reply #2 on: 31 May 2014 à 07:40:58 »

greetings to HC members, i'm new member but not the site.
i have a jasper i bought from a person who wanted to RGH it but failed
i have got my r-jtag kit but i just don't know how i can grab the key
since the  console just has the ecc that has failed to. I'm not the one flashed it there but i also tried but no luck. the dash is 2.0.15574.
i hope there is someone who knows how to boot into xell with a donor.
i don't know very well how to do it.
all the help will be much appreciated

You need to check the post output, and you need to show us your soldering to get help, for instance, did you use the jtag qsb?

Sent from my GT-I9300 using Tapatalk

Logged
Be sure to follow the Rules and if you need it, follow this guide for the BB Codes Search before posting new topics!
Pages: [1]   Go to Top
emails